ResourcesĪ Raspberry Pi with all necessary peripheralsĪ USB hub – if you want to use a keyboard and If you don’t want to do that then you could do it from the console on the Raspberry Pi, or use the LXDE environment, but you’ll need a USB hub because you’ll need three USB devices: a keyboard, mouse and Bluetooth dongle. For example, our expert did this tutorial over SSH. There are multiple ways that you can do this tutorial depending on how comfortable you are with working in a console-based environment. The image we used was‘ -wheezy-raspbian.zip’. You’ll have to adapt the instructions slightly for using the latest Raspbian image rather than the Debian one. You’ll only need to go up to the step where you write the image to the SD card. The instructions for flashing an image to an SD card can be found on our original tutorial. We’ll be using the latest Raspbian image as the operating system for our Raspberry Pi- based Bluetooth keyboard. We’ll also be learning a little bit about binary data and the different forms that it can take. This will provide a useful insight into how a protocol like Bluetooth works, how sockets work, and how data is sent across simple protocols. Today, we’ll be learning how to use a Raspberry Pi to act as a Bluetooth keyboard, and writing our own program to relay input to the client device.

Bluetooth keyboard emulator mac